Sunday, August 23, 2015

Refashioning: Updating an 80s Bedazzled Shirt

I found this crazy 80s bedazzled sweatshirt on the Goodwill dollar rack. It is a for REAL 80s shirt. Notice the shoulder pads. It's got so much potential. . .and it really is better to reuse what we already have than to make something from scratch.




As is my wont, I used another shirt I owned as a sort of guide, although. . .I didn't really want the same style. It was just to get an idea of dimension, really.



So here is my cut out shirt. Time to sew up the sides and hem the sleeves!



At this point, I tried it on, and it looked like an awkward tunic dress, so I decided to do the hi-lo thing with the bottom hem. Below is the picture of how I pinned it.



And here it is sewn.



And here it is on. (I'm wearing it with those harem pants I made a few months ago.)



Here you can see the hi-lo hem. (Sorry, the picture is washed out.)


The End!









Tuesday, August 18, 2015

Make Your Own Pair of Shoes - Criss-cross Kimono/Grunge Style

I know this is a weird post...because...who makes shoes? But, I've been watching YouTube videos and scouring Pinterest for tips and tricks, on and off for about a year now. Last Friday, I woke up and thought, "Today is the day."

I found these adorable booties on Pinterest and decided they were weird, yet sleek enough for a design to figure out. I liked that they were booties and not just shoes.


Okay, so that was a lot of pictures just now, and you get the idea on how to make baby booties really well from those pictures, but. . .adult shoes are a little more detailed.


First, I had to make a pattern. I used a pair of suede "desert boots" that I bought in Rome.



I traced the sole first.



Then, I wrapped the paper around the shoe and came up with this shape for the outer part.



This is what it looks like all wrapped up. I marked the halves of the outer pattern "Inside" and "Outside" so I wouldn't get confused about which side was which.



Then, I traced around the sole pattern, but added a little bit extra for seam allowance--about 1/4 of an inch.



Okay, skipping ahead a bit. I needed some sturdy fabric for the inner lining which is the corduroy plaid you see below. However, just leather and lining wasn't stiff enough, so I actually cut out more pieces of a stiff cream colored fabric to go between the lining and the outer parts. Also, see that orange? That is plastic canvas, and I cut out some sole parts because I didn't want my shoes to flop off my feet. You really take for granted all the construction and inner technology of the shoes you wear. 

Okay, one last comment about all these pieces. This part--cutting and patterning--took about 80% of the total time (and this project took ALL DAY), because I had to keep trimming and trimming everything down until I was happy with it. Even though I used shoes that fit me as a pattern, there were still parts of my pattern that needed tweaking, and that took FOR FLIPPING EVER!!! Now that I have a usable pattern, though, I could duplicate it fairly easily...but I would NEVER make these to sell because there is way too much tailor work involved.



Okay, so to keep everything together as much as possible, I used Elmer's spray adhesive to stick all the pieces together. It has a very temporary hold for fabrics like these, but that was okay because I just needed the pieces to keep from shifting too much as I sewed.



Here, I have sewn the heel portions of the outer pieces. You can see the fronts and the backs.



All right. Here is a step you might not think of, but it makes all the difference in the world if you want your shoes to stay on your feet. You have to make some inner heel reinforcements. I made mine out of plastic canvas. I stitched up those slits to give the pieces some roundedness for the back of the heels.



Here you can see the stitched up reinforcements sewn into the red lining



Then, I sewed the linings to the outer parts around the top seams only.



To make sure the top seams stayed flat, I hammered them. (This is the part that made me feel like a for real cobbler.) I also spray adhered the linings to the outer parts so that they wouldn't shift when I sewed them to the soles.



Then, I spray adhered the soles together. (Notice that the plastic canvas is slightly smaller than the leather and lining. This is for ease of turning right side out. If you like having your seam on the outside, you don't need to worry about making your plastic canvas smaller.)



Okay, you are not supposed to pin leather because pins poke holes and perforate the leather, which weakens it. However. . .I did, and. . .oh well. They are fine and pinning them worked quite well. So there. You can start to imagine what the shoes will look like here.



Okay, if you like the seam on the outside (same as the baby booties), then you are done at this point. I am not a fan of outer seams, though, so I turned mine right side out. You are also supposed to hand sew leather, but. . .I used my machine. I have a Husqvarna Viking and, while it's not industrial or anything, it's awesome. If you have a Brother or Singer, you are going to break your machine. Sorry.



Here is an almost finished shoe.






I am actually super proud of how symmetrical they turned out. Almost a perfect mirror image!



Okay, so if you just want to make slippers, you are done. However, I wanted actual shoes, so I traced around the bottoms of both of the shoes and cut soles out of this "anti-skid mat" I had bought off eBay. It's only 1/8 of an inch thick, but it's pretty dense rubber.




All right. So at this point, I went outside because I was using cement glue and it stinks to high heaven. I should have used a face mask, but I just wanted to finish them, so I did this step as fast as possible. Follow the directions on the cement bottle for yours. My bottle said to paint the glue onto all surfaces and then wait 15 minutes before adhering them. 



I wanted to make heels, so I did. I attached them the same way.




After I waited about 24 hours, I cut off the excess rubber soles and then added a plaid skirt pin to both of them. I might take them off some day, but I kinda like this 90s look right now, so. . .





Not bad for my first shoes ever!



The End!

Saturday, August 1, 2015

Eggplant and Chicken Polenta Casserole

I wanted to make something that would use up the ripe eggplants that my husband has been growing in his garden, but I make Eggplant Parmesan all the time, and I wanted a change. I searched for a recipe into which I could also incorporate some of his ripe tomatoes, sage, and fresh basil.  I found a recipe for Eggplant Polenta Casserole in my vegan "Forks Over Knives" cookbook, but since my husband wishes he could get more protein, I added a chicken breast and two eggs. (If you do it my way and add chicken, you will end up with about three cups of extra chicken broth that you can use for something later.)



Polenta:

The recipe called for five cups of water and 1 1/2 cups of cornmeal, but I didn't have cornmeal, so I improvised.

5 cups water
1 cup washed quinoa
1 cup flaxseed meal
dash of sea salt
(handful of mushrooms)
(1/2 cup of grated cheese)
(2 eggs)

I boiled 5 cups of water and gradually added the quinoa and flaxseed until the mixture was creamy. It took about 15-20 minutes, stirring often. Then, I added a dash of sea salt. Once that was finished, I put it into a glass mixing bowl and set it aside to work on the next part. (Before I put it all in the oven is when I beat two eggs, 1/2 cup of grated cheese, and the mushrooms into it.)







Casserole Filling:

1 large onion, diced
1 large bell pepper, diced
2 eggplants, diced (My husband's organic garden variety are about half the size of the steroidal ones you get at the grocery store.)
1/4 cup minced garlic
2 large tomatoes, diced
1 cup fresh, chopped basil
1 sage leaf, chopped
salt and pepper to taste

Once I set aside the polenta from the cooking pan into the mixing bowl, I used the same pan to sear and then boil a frozen chicken breast. I boiled it in 3 cups of water for 10 minutes. While that was happening, I went ahead and chopped my onions, bell pepper, eggplant, and garlic. I came back to my chicken breast and let it rest on a plate while I converted the stock into a glass jar for using in soups later. I don't know why it looks cloudy in this picture, because it's actually translucent.



Then, I put my chopped vegetables into the same cooking pan and started sauteing them while I diced the chicken breast on its plate. After that, I diced the tomatoes and added them to the other vegetables and continued to saute (about 10 minutes overall). I preheated the oven for 350 degrees. While the vegetables were continuing to saute, I chopped the basil and one sage leaf and added them and the chopped chicken breast into a 9"x13" casserole dish.  Then I added the sauted vegetables to the casserole dish and tossed them all together. 



This is the point where I then beat two eggs, a handful of mushrooms, and 1/2 cup of grated cheese into the polenta. I poured the polenta on top of the vegetables and put them into the oven for 40 minutes. (You can see in the picture that I also sprinkled some dry basil on the top. That was just to make it more photogenic.)




After 40 minutes, I opened the door to take this picture, but then I turned the stove off and let the whole thing cool down on its own--Free cooking energy! (I also burned my finger when I pulled the shelf out to take the pictures, and I'm icing it while I type. . .which is so annoying, and I don't recommend it!)


The End.